UTV Front Windshield

As low as $48.76 Regular Price $60.95
In stock
SKU
UTV Front Windshield
UTV Front Windshield is rated 4.7 out of 5 by 10.
  • y_2019, m_8, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_UTV_bv32_Front_bv32_Windshield, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_classicaccessories
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 305.49ms
  • REVIEWS, PRODUCT

Instantly shields against wind and rain.

  • Fits Kawasaki Mule 4000, 4010 4x4, 4010 4x4 Diesel, 4010 Trans 4x4 Diesel
  • Ultra-clear window material framed with heavy-duty ProtekX™ Extreme fabric
  • Two-year limited warranty
  • Attaches in seconds to the roll cage of UTVs with cinch-tight straps and rip-and-grip closure tabs
  • Rolls up for easy storage

California Residents

Prop WARNING: This product can expose users to Bis (2-ethylhexyl) (DEHP) and/or other phthalates, known to the state of California to cause cancer, birth defects and/or reproductive harm. www.p65warnings.ca.gov/

Rated 4 out of 5 by CaseIH from Works as a cheap windshield I bought this for my Honda pioneer 1000/5. It fits almost perfectly. Saves a lot of money vs the high price pexi or glass.
Date published: 2018-11-14
Rated 4 out of 5 by SPolinsky from Personal review of roll up windshield Pros: Price/Performance ratio is good; easy to store; good temporary protection against rain/wind/cold; fits Polaris well; durable; good product for the price Cons: Difficult to stretch/adjust enough to remove wrinkles even when it has been rolled up rather than folded; slight nuisance for one person to install since you have to move from one side of the vehicle to the other several times in order to get it properly adjusted/fastened to maximize visibility and minimize flapping while moving; Best Uses: Temporary, quick on/off solution for occasional weather protection and for those who don’t want a permanent windshield that gets dirty/scratched or otherwise inhibits clear visibility. NOTE: I do a lot of wildlife photography on my property while riding in the Polaris and need an unobstructed view through the front so I can stop and take photos quickly; any type of permanent windshield would diminish photo quality looking through the front; or, frequently require complete stops to get out and take photos; or, require repositioning of the Polaris in order to take unobstructed photos out the sides. With wildlife photography, if you hesitate or move around too much, your subject (and neat wildlife photo) could be gone. Comments: Cumbersome for one person to install; not much can be done about that due to flexible material; Instructions should indicate that it is easier to install lower Velcro adhesive strip with the hood removed for easier access to lower windshield frame; Would be nice if a storage bag was included so the windshield could be stored and protected on the vehicle itself. I made a homemade storage pouch (see photos) from a heavy duty contractor trash bag and piece of Velcro and store it in the ceiling of the cab with twist ties. It works well; Will the Velcro strip adhesive be difficult to remove in the event the roll up windshield is not wanted anymore and replaced with a more permanent factory windshield?; Windshield should probably be rolled up rather than folded for storage to minimize creases/damage; Takes too much time to adjust windshield to try and remove wrinkles after installation; Traps heat in cab; bad in summer, good in winter; Friend got disoriented while driving due to blurred visibility through windshield; I have no problem, but am more familiar with the trails/property; Would be helpful if a water-shedding (i.e., Rain-X) product could be applied to improve visibility during rains. Can something like this be used?; Providing a “Usage Tips” (e.g., using Rain-X, removing hood for easier installation, etc.) in the Instruction Manual would make the product more attractive and helpful to buyers/users; It takes me approximately 5 minutes to install the windshield by myself, making it almost necessary to install the windshield far enough in advance without knowing if it will really rain or not. It could turn out that the effort expended to install the windshield could be for not, if it ends up not raining. On the other hand, waiting until it starts to rain first could result in a soaking while installing the windshield making that effort mute as well; Debris (leaves, twigs, bugs, etc.) can accumulate on the Velcro strip at bottom of the windshield frame, possibly reducing holding power between windshield and Velcro strip.
Date published: 2017-11-15
Rated 5 out of 5 by Big Kel1970 from Looks good fits great Bought to block wind when plowing snow looks like will do a great job
Date published: 2017-11-09
Rated 5 out of 5 by John from I'd recommend this great fit and materials. John
Date published: 2017-08-30
Rated 4 out of 5 by CarolCmore from Really Helps with Keeping the wind out out The plastic windshield should become smooth and clear without wrinkles after placing on flat floor for several hours to reduce visability issues.
Date published: 2016-12-03
Rated 5 out of 5 by MuleDriver from good product The windscreen fit my Mule as described. It does a good job of deflecting some wind while still letting air pass by. Good for warmer weather only I think.
Date published: 2013-10-22
Rated 5 out of 5 by ctsent from This is what I was expecting. This was what I was looking for. The fit was super for the size of the tire and was easy to install.
Date published: 2013-08-25
Rated 5 out of 5 by BIGBUCK from EXCELLENT PRODUCT FOR THE PRICE THIS IS A GREAT PRODUCT FOR THE PRICE. ALTHOUGHT IT SAYS IT WILL FIT RANGERS UP TO 2009 I BOUGHT ONE FOR MY FRIENDS 2013 MID SIZED POLARIS AND IT FITS GREAT (GET THE 55 IN ONE). I ALSO BOUGHT ONE FOR MY SMALL 2013 POLARIS RANGER AND IT FITS GREAT (47 IN ONE). I DON'T KNOW WHY THEY DON'T MAKE THEM HIGHER FROM TOP TO BOTTOM INSTEAD OF JUST 26 INCHES. I JUST ADDED A PIECE OF MATERIAL WITH SOME SNAP FASTNERS. TUCK THE REST OF THE MATERIAL INTO THE HOOD OF THE QUAD. I HAD ONE FOR MY YAMAHA RHINO (47 INCH) IT FITS FINE ON MY POLARIS, BUT HAS SOME SCRATCHES AS IT IS 6 YEARS OLD SO THAT IS WHY I BOUGHT A NEW ONE.
Date published: 2013-07-03
  • y_2019, m_8, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_UTV_bv32_Front_bv32_Windshield, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_classicaccessories
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 142.63ms
  • REVIEWS, PRODUCT

what are the real dimensions how many inches tall and wide?

Asked by: Ryanrc
The dimensions vary depending on make and model of your vehicle. Please choose from the drop down menu. If you need assistance you may email "[email protected]" or Call Toll Free 1-800-854-2315 M-F 7:30am - 4:00pm
Answered by: ClassicAccessories
Date published: 2019-04-25

2013 polaris Ranger 900 XP, would this fit!?! or what one would!?!

Asked by: spitty19
Yes, this would fit your Polaris Ranger 900 XP. Use the drop down menu on the Dimensions tab to view the different options. Then to make a selection, use the drop down arrow with the title 'Choose an Option' to select your exact model.
Answered by: ClassicAccessories
Date published: 2019-02-14

Model # for a 2009 polaris ranger 700 front and rear and what are the winow dimensons?

Asked by: Cowpuncher
We do not have one to fit the Polaris Ranger 700 Model. Perhaps our customer service team could assist you. Email: [email protected] or Call Toll Free 1-800-854-2315 M - F 7:30am to 4:00pm
Answered by: ClassicAccessories
Date published: 2018-12-04

Will this fit a 2018 Kawasaki Mule 4010 Trans 4x4?

Asked by: JLot
Will this fit 2009 polaris ranger 700?
Answered by: Cowpuncher
Date published: 2018-12-02

Dimensions on 2015+ Mule Pro FX model, # 18-147-010401-RT? Thanks in advance!

Asked by: MarkC
The #18-147-010401-RT is designed to fit Kawasaki® Mule Pro FX & DX (2015+ models) and the following dimensions are of the windshield laying flat on a table and not necessarily on the rig: Overall length 59" Overall height at center 31.25" You're welcome!
Answered by: ClassicAccessories
Date published: 2018-10-23

I have a 2016 Honda Pioneer 500 with windscreen area opening dimensions of 40" across at bottom, 38" across at top and 25" for height. Do you have a product that would fit this opening?

Asked by: cm1991a1
Our UTV windshields are designed for model specific UTV's and unfortunately it has not been fitted for your Honda.
Answered by: ClassicAccessories
Date published: 2018-06-18

What is the dimencsion of # 18-099-010401-00 ? thx

Asked by: david525
The dimensions of the Classic Accessories Item # 18-099-010401-00 is 52" Overall Length x 34" Overall Height
Answered by: Classic Accessories
Date published: 2018-03-14

Do you have a front windshield for polaris ranger 570 full size 2015 ? Thx

Asked by: David525
We only have windshields for Polaris Ranger 570 mid size.
Answered by: Classic Accessories
Date published: 2018-03-13
  • y_2019, m_8, d_20, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_UTV_bv32_Front_bv32_Windshield, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_classicaccessories
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 200.86ms
  • QUESTIONS, PRODUCT

Dimensions

Fits Stock No. Color
FITS KAWASAKI MULE 4000, 4010 4x4, 4010 4x4 DIESEL 18-093-010401-00 Black
FITS KAWASAKI MULE 600, 610, 610 4x4, 610 4x4 XC 18-094-010401-00
FITS KAWASAKI MULE PRO FX & DX 2015+ 18-147-010401-RT
FITS KAWASAKI TERYX 750 F1 18-095-010401-00
FITS POLARIS RANGER '02 - '08 78627
FITS POLARIS RANGER 400, 570, 800, EV, 500-570 CREW 18-097-010401-00
FITS POLARIS RANGER MID SIZE 400, 570, 800, 2015+ 18-154-010401-RT
FITS POLARIS RANGER 900 XP, CREW 900 18-098-010401-00
FITS POLARIS RANGER 6x6 800, 800 FULL SIZE, CREW 800, CREW DIESEL, DIESEL 18-099-010401-00
FITS POLARIS RZR, RZR 4, 4 800, 570, 800, S 800, XP 4 900, XP 900 18-012-010401-00
FITS YAMAHA RHINO 18-100-010401-00
FITS YAMAHA VIKING 2015+ 18-160-010401-RT